Heating Cable for Water Pipe

Heating cables+1

The water pipe heating cable is specially designed for installation in and on the water pipe 10W/m. The water pipe heating cable Heatcom Aqua Safe is equipped with a connector for quick and convenient installation. The heating cable is certified for drinking water. In the case of a sewer pipe, installation is only on the pipe. When installing inside the water pipe, choose the insert nipple as a set and don't forget the thermostat. Read more about installation below. Lengths: 1m, 2m, 4m, 6m, 8m, 10m, 12m, 14m, 16m, 18m, 20m, 22m, 24m, 30m, 40m

Heating cables+1

The thin pipe heating cable Kima Green (8 W/m) is a reliable solution for protecting water pipes from freezing. It is officially approved for use in direct contact with drinking water. Thanks to its small diameter (5.5 mm), the heating cable is ideal for installation inside pipes without obstructing the water flow. It is also highly suitable for external installation on sewage and drainage pipes.

Heating cables+2

Self-regulating heating cable from HTS eHeat Water – preassembled set 11W/m, designed for protecting water pipes from freezing, suitable for both internal and external installation. The self-regulating pipe heating cable comes with a 1.5m power cable. For internal pipe installation, a separate insertion nipple for the heating cable must be purchased. Certified for drinking water! The most energy-efficient result is always achieved when used together with a thermostat.  

Heating cables+3

The HTS eHeat Gutter self-regulating heating cable (20W/m) provides reliable ice and frost protection. It is a professional solution for protecting gutters, downspouts, and external sewage pipes from freezing. The system effectively prevents the formation of ice dams and damage to utilities even at temperatures dropping to -30 °C. The cable is supplied as a ready-to-use kit with a plug, making installation as simple and fast as possible. ✅ Efficiency: Automatically adjusts its power output depending on the ambient temperature. ✅ Versatility: Suitable for roofs, rainwater systems, and Ø110 mm sewer pipes. ✅ Economy: For maximum reduction in electricity costs, we highly recommend using the cable together with a thermostat.

Heating cables+2

HTS EHEAT® WATER is a self-regulating heating cable for protecting water pipes from freezing. Its food-safe outer jacket is approved for installation inside drinking water pipes. The cable can also be installed on the outside of a pipe beneath insulation. The cable can be cut to the required length, and its heat output adjusts to temperature. A thermostat is recommended to switch the heating off when frost protection is no longer needed. For installation inside a pipe, use a suitable cable entry gland and connection accessories.

Heating cables+2

HTS Global eHeat Gutter is a self-regulating heating cable designed to prevent ice formation on roofs, gutters, downpipes and drainage systems. Its UV-resistant and moisture-proof outer jacket makes it suitable for outdoor installations, including SBS bitumen roofs. The cable provides 20 W/m at +10 °C on an insulated metal pipe and approximately 40 W/m at 0 °C in ice water. It operates at 230 V, has a maximum operating temperature of +65 °C when energised and withstands temperatures up to +85 °C when unpowered. The cable can be cut to the required length on site. A suitable thermostat or automatic snow and ice controller should always be used to reduce energy consumption and prevent unnecessary heating.

Heating cables+2

The portable water pipe frost protection wrap Heatcom Heating Wrap is a ready-to-use solution for preventing water and drain pipes from freezing on construction sites and in temporary installations. The wrap combines a self-regulating 15 W/m heating cable with built-in thermal insulation. The portable water pipe heater is wrapped around the pipe and secured with a hook-and-loop fastening. Once installed, it is connected to the power supply. The product is easy to remove, relocate and reuse.

Heating Cable for Water Pipe+2

The heating cable entry gland for water pipes with a 3/4-1″ thread is suitable for the Heatcom Aqua heating cable or self-regulating water pipe heating cables. The set includes 2 rubber seals, making this heating cable entry gland highly compatible with the Heatcom Aqua water pipe heating cable and most other self-regulating heating cables.

Heating Cable for Water Pipe+2

The heating cable pressure fitting 3/4" - 1" is designed for the secure and watertight installation of heating cables directly inside water pipes. This high-quality in-pipe heating cable gland ensures a completely hermetic seal, providing a safe solution for internal pipe freeze protection.

Heating Cable for Water Pipe+1

Installing a KIMA Connect  heating cable inside a water pipe requires a reliable feed-through—a compression fitting. This dedicated heating cable insertion nipple ensures a completely hermetic, watertight, and secure seal for your plumbing system. The process of inserting the heating cable into the pipe is carried out using a suitably sized T-junction (available at any standard plumbing supply store).

Heating Cable for Water Pipe+2

Self-regulating heating cable connection kit. Suitable for making connections for 10W, 11W, 15W, 20W, 25W self-regulating heating cables with regular electrical cable. Also includes instructions for making the end cap. Instructions in Estonian with illustrative pictures.

DIN Rail Thermostat+2

Control Panel Thermostat Avantec VD022 -5…+35°C, 230V, 16A, with Floor Sensor Included The thermostat is DIN rail-mounted and suitable for controlling the temperature of underfloor heating, managing heating cables for outdoor areas, or protecting water pipes from freezing, among other uses.

Underfloor Heating and Room Thermostats+2

The thermostat for a socket Rti-Tek   with Wifi is equipped with two sensors: one 5 cm and one 3 meters long. Thanks to its two different operating modes, the thermostat can be used to control both heating and cooling devices. It is well-suited for preventing water pipes from freezing, regulating the temperature of a water heater, or managing the temperature of a tank. The temperature can be easily adjusted directly on the thermostat within a range of -10 to +90°C. The WiFi function allows you to conveniently monitor and configure the thermostat via your phone, no matter where you are. Connecting the thermostat to your phone via WiFi is optional and serves as an additional feature.

Underfloor Heating and Room Thermostats+2

The Inkbird ITC-308-WIFI is a plug-in temperature controller equipped with an external temperature probe and two separately controlled output sockets: one for heating and one for cooling. The thermostat can maintain a selected temperature between –40 and +100 °C. Its WiFi connection allows you to monitor the measured temperature, change settings and receive alarm notifications remotely through the INKBIRD app.

Heating Cable for Water Pipe+1

Hoiatuskleebis, mis on mõeldud paigaldamiseks näiteks veetorustikele või muudele paigaldistele teavitamaks küttekaabli olemasolust antud asukohas. 10tk komplektis. Mõõdud 10cm x 3,5cm

Heating Cable for Water Pipe+1

Tugeva akrüül-liimiga alumiiniumteip küttekaablite veetorudele kinnitamiseks. Pikkus 25 m, laius 50 mm, temperatuuritaluvus -40°C kuni +160°C.

Heating cables+2

The high-temperature flat heating cable, also known as heating tape, is designed for heating and maintaining the temperature of machine parts, industrial equipment, pipework and laboratory installations. The maximum permissible temperature of the fibreglass-insulated heating element is +450 °C, while its rated output is approximately 250 W/m. Unlike a conventional round heating cable, the 35 mm wide flat construction provides a larger contact area with the heated object. This allows heat to be transferred over a wider surface and makes the heating tape suitable for applications requiring high output per metre and high temperature resistance. The heating cable can be used for pipes, valves, vessels, machine components, test equipment and various process structures. The length, rated voltage and power output are selected according to the requirements of the application.

Heating cables+3

Powerful high-temperature PTFE heating cable is a splash-proof , heat-resistant , and exceptionally flexible heating cable specifically designed to operate in demanding conditions and withstand high temperatures (up to 260°C) . This powerful heating cable provides wide-area heat transfer , is equipped with protective conductor braiding , and features a factory-fitted 1-meter main connection cable with an M20 x 1.5 screw connection for safe and reliable installation

Industrial Heating Mats up to +230°C+1

Soojendusmatid on teisaldatavad küttematid jõukaablite soojendamiseks ja sirgendamiseks, digitaalse termostaadi ning PTC1000 anduriga.