Industrial heating cables

Heating cables+2

Sigmian HTP is an ATEX-certified self-regulating industrial heating cable for freeze protection and temperature maintenance of pipelines, tanks and process equipment. The heating cable is suitable for both non-hazardous and hazardous Ex areas. The cable adjusts its power output according to the surrounding temperature, producing more heat in colder areas and less in warmer areas. Its parallel construction allows the cable to be cut to the required length on site. Always use the heating cable with a suitable thermostat.

Heating cables+2

Sigmian CTE is a high-output, ATEX-certified self-regulating industrial heating cable for heating outdoor areas, concrete, pipelines and vessels. It is primarily intended for applications where a standard-output self-regulating cable does not provide sufficient heating capacity. The Sigmian product page specifies an output of 80 W/m. The technical datasheet gives the 90-CTE model a nominal output of 90 W/m at 0 °C when installed in concrete. The maximum continuous operating temperature when energised is +80 °C, while the maximum continuous exposure temperature when de-energised is +100 °C. The heating cable operates at 230 V and is suitable for both non-hazardous and hazardous Ex areas.

Heating cables+2

Sigmian BTC is an ATEX-certified high-temperature self-regulating industrial heating cable designed for frost protection and temperature maintenance on pipelines, tanks and process equipment. Available power outputs at +10 °C are 8, 15, 24, 30, 37, 45 and 60 W/m. The cable operates at 230 V. Its maximum continuous operating temperature is +120 °C when energised, while the maximum exposure temperature when de-energised is +200 °C. BTC is suitable for both non-hazardous and hazardous Ex areas. Its parallel construction allows the cable to be cut to the required length on site. A suitable thermostat should always be used for accurate temperature control, lower energy consumption and longer cable life.

Heating cables+2

Sigmian BTX is an ATEX-certified high-temperature self-regulating industrial heating cable for frost protection and temperature maintenance on pipelines, tanks and process equipment. Available power outputs at +10 °C are 8, 15, 30, 45, 60, 75 and 100 W/m. The cable operates at 230 V. Its maximum continuous operating temperature is +205 °C when energised, while the maximum exposure temperature when de-energised is +250 °C. BTX is suitable for both non-hazardous and hazardous Ex areas. Its parallel construction allows the cable to be cut to the required length on site. A suitable thermostat must be used for accurate temperature control, lower energy consumption and longer cable life.

Heating cables+1

If you are looking for heating cables that can withstand even the most demanding conditions, the Sigmian SNF Teflon-coated PTFE heating cable is the perfect choice. This highest-quality heat-resistant heating cable is specifically designed for applications requiring exceptional thermal stability and chemical resistance. The Teflon coating (PTFE) gives the cable the unique ability to repel chemicals and endure extreme heat, making it the preferred choice among engineers and technicians.

Heating cables+3

Powerful high-temperature PTFE heating cable is a splash-proof , heat-resistant , and exceptionally flexible heating cable specifically designed to operate in demanding conditions and withstand high temperatures (up to 260°C) . This powerful heating cable provides wide-area heat transfer , is equipped with protective conductor braiding , and features a factory-fitted 1-meter main connection cable with an M20 x 1.5 screw connection for safe and reliable installation

Heating cables+2

The high-temperature flat heating cable, also known as heating tape, is designed for heating and maintaining the temperature of machine parts, industrial equipment, pipework and laboratory installations. The maximum permissible temperature of the fibreglass-insulated heating element is +450 °C, while its rated output is approximately 250 W/m. Unlike a conventional round heating cable, the 35 mm wide flat construction provides a larger contact area with the heated object. This allows heat to be transferred over a wider surface and makes the heating tape suitable for applications requiring high output per metre and high temperature resistance. The heating cable can be used for pipes, valves, vessels, machine components, test equipment and various process structures. The length, rated voltage and power output are selected according to the requirements of the application.

Heating cables+2

Kõrge temperatuuriga küttekaabel 250W/m koos termostaadiga pakub täpset temperatuuri reguleerimist kuni 400°C, muutes selle ideaalseks kõrgtemperatuurilisteks tööstus- ja laborirakendusteks. Antud küttekaabel tagab kiire, usaldusväärse ja tõhusa soojuse ka nõudlikes keskkondades.

Heating cables+2

Suure võimsusega küttekaabel 50W/m ja termostaat 0-200°C – tagavad usaldusväärse ja tõhusa soojuse mitmesugustes tööstuslikes ja laboratoorsetes rakendustes. See suure võimsusega küttekaabel pakub optimaalset temperatuuri kontrolli protsessides, ühtlast kuumutamist, näiteks torude, pumpade ja ventiilide õige temperatuuriga tööreziimide tagamine, kemikaalide käitlemine ja temperatuuritundlike vedelike töötlemine.

Heating cables+1

Kõrge temperatuuriga küttekaabel tööstusele metallkestas, keskkonda, kus on vaja hoida või taluda kõrgeid temperatuure. Kuni +800°C

Industrial heating cables

The TKT/M is a heat-shrink connection and termination kit designed for connecting a self-regulating heating cable to a power supply cable and hermetically sealing the free end of the heating cable. It is suitable for SST / Sigmian HTM, HTA, HTP and CTE series heating cables.

Industrial heating cables+1

The TKR is a connection and end termination kit for connecting a self-regulating heating cable directly to the terminals of a junction box and hermetically sealing the free end of the cable. It is suitable for SST / Sigmian HTM, HTA, HTP, BTC, BTCe, BTX and BTXe series heating cables and junction boxes with an M25 cable entry.