ALL PRODUCTS

Drum Heating

MIL-DH200 on teisaldatav tööstuslik tünnisoojendi standardse 200-liitrise metalltünni külgede ja põhja üheaegseks soojendamiseks. Komplekt aitab sulatada ja soojendada tahkeid või suure viskoossusega aineid, hoida vajalikku töötemperatuuri ning muuta materjali pumpamiseks, segamiseks või tünnist eemaldamiseks voolavamaks. Tünni kütteseadmesse kuuluvad avatav terasplekist küttekorpus, elektriline põhjasoojendi ja soojuskadu vähendav isolatsioonikaas. Elektrooniline kaheosaline temperatuuriregulaator võimaldab tünnisoojendit ja põhjakütet eraldi juhtida.

Heating cables+2

The portable water pipe frost protection wrap Heatcom Heating Wrap is a ready-to-use solution for preventing water and drain pipes from freezing on construction sites and in temporary installations. The wrap combines a self-regulating 15 W/m heating cable with built-in thermal insulation. The portable water pipe heater is wrapped around the pipe and secured with a hook-and-loop fastening. Once installed, it is connected to the power supply. The product is easy to remove, relocate and reuse.

Industrial Moisture-Proof Heaters

The Hitte EXX electric trench heater is a fan-assisted electric trench convector designed for primary or supplementary room heating. This 230 V in-floor electric radiator requires no connection to a hydronic heating system, making it suitable for locations where heating pipework cannot be installed or where the existing heating system is insufficient. The recessed electric heater is particularly suitable for installation in front of floor-to-ceiling windows, glass façades and shop windows. The fan creates a flow of warm air that forms a thermal barrier in front of the glazing, reduces cold downdraughts and helps prevent condensation on the glass. Only the decorative grille remains visible at floor level.

EV Chargers

Carmax Smartload X400 Long is a portable electric vehicle charger with an approximately 10-metre charging cable. The three-phase 400 V EV charger connects to a five-pin 16 A CEE socket and charges an electric car or plug-in hybrid with a Type 2 charging port at up to 11 kW. WiFi connectivity and the free Powerant app allow the smart EV charger to operate during the cheapest electricity spot-price periods or according to a user-defined price cap. The Long version is particularly suitable for locations where the CEE socket is further away from the parking space.

Heating Cable for Water Pipe+2

The heating cable entry gland for water pipes with a 3/4-1″ thread is suitable for the Heatcom Aqua heating cable or self-regulating water pipe heating cables. The set includes 2 rubber seals, making this heating cable entry gland highly compatible with the Heatcom Aqua water pipe heating cable and most other self-regulating heating cables.

Heating cables+1

The thin pipe heating cable Kima Green (8 W/m) is a reliable solution for protecting water pipes from freezing. It is officially approved for use in direct contact with drinking water. Thanks to its small diameter (5.5 mm), the heating cable is ideal for installation inside pipes without obstructing the water flow. It is also highly suitable for external installation on sewage and drainage pipes.

Industrial moisture-proof heaters+1

The Hitte ESX is a free-standing electric convector equipped with a fan. This floor-mounted electric convector is the ideal solution for rooms where wall-mounted radiators or water heating systems cannot be installed. Thanks to its low profile (height including legs is only 305 mm), it is perfectly suited for placement in front of panoramic windows, glass facades, and shop windows, preventing condensation on the glass and ensuring fast, even heat distribution. The convector operates as an independent unit requiring only an electrical connection. For maximum safety, the heating element is securely enclosed within the casing, and the convector is covered by a safety-compliant decorative aluminum or stainless steel grille.

Shoe and Boot Dryers+1

This industrial shoe dryer is designed for drying up to 15 pairs of shoes, boots, gloves, ice skates, ski boots, or other sports and work footwear. The boot dryer is equipped with a timer to program the start time, and a thermostat to set the outgoing air temperature of the dryer. Control is very simple and intuitive.

EV Chargers+1

Carmax Smartload 230 V is a portable electic car charger that connects to a standard earthed Schuko socket. Equipped with a Type 2 charging connector, the electric car charger is suitable for charging EVs and plug-in hybrids at home, at a holiday home or while travelling. Using a WiFi connection and the free Powerant app, charging can be scheduled for the lowest electricity spot-price periods or controlled with a maximum price limit. The maximum charging power is 3.7 kW, and the charging current can be adjusted between 8 and 16 A to suit the available socket.

EV Chargers+1

Carmax Smartload 400 V is a portable three-phase EV car charger that connects to a five-pin 400 V 16 A CEE socket. Equipped with a Type 2 connector, the electric car charger can charge an EV or plug-in hybrid with up to 11 kW of power. Using a WiFi connection and the free Powerant app, charging can be scheduled for the lowest electricity spot-price periods or controlled with a maximum price limit. If a suitable 400 V CEE socket is already available, the charger can be used without installing a permanent wall-mounted charging station.

Heating Mats and Heated Rugs+1

Heatcom Heated Carpet Pro on pehme ja teisaldatav jalgade soojendusvaip kodukontorisse, töökohta ning jaheda põrandaga eluruumidesse. Elektriline soojendusega vaip on mõõtmetega 70 × 50 cm, võimsus 85 W ja ligikaudne pinnatemperatuur 30–35 °C. Toode töötab 230 V vooluvõrgus, selle kaitseaste on IPX7 . Soojendusvaip on vastupidava tekstiilpinnaga ja kahejuhtmeline kütteelement jaotab soojuse ühtlaselt. Alumine isolatsioonikiht vähendab soojuskadu põrandasse ja suunab rohkem soojust jalgade poole. Lisaks jalgade soojendamisele sobib vaip ka märgade jalatsite kuivatamiseks esikus või garderoobis.

DIN Rail Thermostat+1

The Heatline HL-55-W WiFi gutter heating thermostat automatically controls heating cables installed on roofs, in gutters and inside downpipes. The HL-RS gutter moisture sensor detects meltwater, while the HL-AS outdoor temperature sensor measures the ambient air temperature. The roof and gutter heating controller activates the heating system only when weather conditions around 0 °C create a risk of ice or icicle formation. The HL-55-W thermostat can be configured using its colour display or controlled remotely via Wi‑Fi and the Tuya SmartLife mobile app.

DIN Rail Thermostat+1

ELKO EP RHT-1 combines a hygrostat and thermostat in one compact DIN rail device. It controls connected equipment according to air temperature and relative humidity. Depending on the selected operating mode, it can control a fan, heater, cooling unit or dehumidifier. The built-in sensor measures the ambient air temperature and relative humidity. Eight selectable control modes allow the relay output to activate when one condition is met or when both temperature and humidity conditions are met simultaneously. RHT-1 can, for example, activate ventilation when temperature or humidity rises, control heating to help reduce the risk of condensation, or operate cooling and dehumidifying equipment according to the selected conditions.

Underfloor Heating and Room Thermostats+1

The Heatline HL-05 is a touchscreen WiFi underfloor heating thermostat with a built-in air sensor and an external floor sensor supplied as standard. It is suitable for controlling electric underfloor heating, other compatible 230 V heating systems and 230 V thermal actuators used on hydronic underfloor heating manifolds. The thermostat can be controlled directly from its touchscreen or remotely through the Smart Life app. It also works without a WiFi connection as a standalone manually adjustable thermostat. Remote control and the weekly schedule become available after the thermostat has been connected to WiFi and the Smart Life app. The HL-05 is available in white and black.

Microinverters

Hoymiles DTU-Lite-S WIFI mikroinverteri monitooringuseade HMS ja HMT seeria inverteritele andmete kogumiseks mugavalt kasutatava plug-and-play seadmega. Hoymiles DTU-Lite-S on mõeldud inverterite andmete edastamiseks kasutajasõbralikule monitooringu platvormile, mis töötab nii arvutis interneti brauseri kaudu kui ka Android ja iOS seadmetes.

Heating Cable Installation Accessories

The galvanized steel heating cable fixing band is designed for securing various heating cables to different surfaces. Typically, this fixing band is used to fasten underfloor heating cables at the correct spacing and to hold the cable firmly in place during concrete pouring. The heating cable fixing band features lockable fastening tabs spaced at 25 mm intervals, allowing the heating cable to be locked into place very securely and accurately.

Gutter and Roof Heating Cable+1

Heating cable fixing chain in rainwater pipe, 1 m - hot-dip galvanized long link 4mm

Industrial heating cables

The TKT/M is a heat-shrink connection and termination kit designed for connecting a self-regulating heating cable to a power supply cable and hermetically sealing the free end of the heating cable. It is suitable for SST / Sigmian HTM, HTA, HTP and CTE series heating cables.

IBC Tote Heating+2

The oil heater is specifically designed for heating hydraulic oil in tanks and reservoirs. This industrial submersible oil heater preheats the oil and helps reduce its potential water content, which in turn significantly reduces wear and tear on the entire hydraulic system. If necessary, this oil heating element is also perfectly suitable for heating other liquids. The submersible oil heater is designed with user-friendliness and quick installation in mind. The submersible oil heater is equipped with strong magnets, allowing it to be easily and conveniently attached to the bottom of the tank or reservoir. Thanks to this smart design, cumbersome permanent installation is not required, and there is no need to empty, weld, or separately clean the tank before using the oil heater .

Industrial heating cables+1

The TKR is a connection and end termination kit for connecting a self-regulating heating cable directly to the terminals of a junction box and hermetically sealing the free end of the cable. It is suitable for SST / Sigmian HTM, HTA, HTP, BTC, BTCe, BTX and BTXe series heating cables and junction boxes with an M25 cable entry.

Infrared heating panels+1

Hollow Ceramic Infrared Heating Element FFEH / SFEH Ceramicx FFEH and SFEH are ceramic infrared heating elements featuring a lightweight hollow body filled with high-density insulation. This construction reduces rear heat loss, provides faster heat-up and increases forward radiant efficiency. These flat heating elements are ideal for thermoforming, composite curing and industrial processes where the infrared emitter is positioned close to the target material. Available from 400 W to 1000 W, with a standard voltage of 230 V and an optional built-in type K thermocouple.

Infrared heating panels+1

Ceramicx RAS infrared heater reflectors are designed for mounting ceramic infrared heating elements and directing radiant heat efficiently towards the required surface. Manufactured from polished aluminium-clad steel, their shaped construction improves heat distribution and reduces unnecessary energy loss compared with a flat reflector.

Voltage Monitoring Relays and Electrical Equipment Protection

ZUBR Dt is a single-phase voltage monitoring relay with thermal protection. It protects domestic and industrial electrical equipment against dangerous overvoltage, undervoltage and voltage deviations caused by neutral conductor failure. The voltage relay is installed inside an electrical distribution board and disconnects the load when the voltage exceeds the user-defined limits. Heatline offers 25 A and 40 A models. ZUBR Dt is intended primarily for a standard 230 V mains supply with a sinusoidal voltage waveform. It is suitable for protecting household appliances, heating equipment, pumps, compressors, refrigerators and other voltage-sensitive equipment. Detailed settings and wiring diagrams are available in the manufacturer’s English ZUBR Dt web manual . ZUBR Dt is a voltage monitoring relay, not an impulse surge protective device. It does not replace a Type 1 or Type 2 SPD but can be used alongside one as part of a coordinated protection system.

Heating cables+2

Sigmian BTC is an ATEX-certified high-temperature self-regulating industrial heating cable designed for frost protection and temperature maintenance on pipelines, tanks and process equipment. Available power outputs at +10 °C are 8, 15, 24, 30, 37, 45 and 60 W/m. The cable operates at 230 V. Its maximum continuous operating temperature is +120 °C when energised, while the maximum exposure temperature when de-energised is +200 °C. BTC is suitable for both non-hazardous and hazardous Ex areas. Its parallel construction allows the cable to be cut to the required length on site. A suitable thermostat should always be used for accurate temperature control, lower energy consumption and longer cable life.