Thermostats and Temperature Controllers

Underfloor Heating and Room Thermostats+1

The Heatline HL-05 is a touchscreen WiFi underfloor heating thermostat with a built-in air sensor and an external floor sensor supplied as standard. It is suitable for controlling electric underfloor heating, other compatible 230 V heating systems and 230 V thermal actuators used on hydronic underfloor heating manifolds. The thermostat can be controlled directly from its touchscreen or remotely through the Smart Life app. It also works without a WiFi connection as a standalone manually adjustable thermostat. Remote control and the weekly schedule become available after the thermostat has been connected to WiFi and the Smart Life app. The HL-05 is available in white and black.

Underfloor Heating and Room Thermostats+1

The Heatline HL-12 is a programmable WiFi thermostat with a touchscreen, built-in air sensor and a 3-metre external floor temperature sensor. It is designed for electric underfloor heating and other 230 V heating systems. The thermostat can be controlled directly from the touchscreen or remotely through the Smart Life and Tuya Smart apps. Three sensor control modes are available: room temperature control using the built-in air sensor; floor temperature control using the external floor sensor; room temperature control with a maximum floor temperature limit.

Underfloor Heating and Room Thermostats+1

The Heatline HL-44 is a smart WiFi underfloor heating thermostat designed especially for replacing an existing thermostat. It supports floor temperature sensors from many different manufacturers and fits a wide range of common 55 × 55 mm switch frames. In many installations, this means that the existing floor sensor and decorative frame can remain in place. Before ordering, always check the resistance of the installed floor sensor and the exact model of the switch frame. The heating can be controlled directly from the thermostat’s touchscreen or remotely through the Tuya Smart or Smart Life app. The HL-44 is suitable for controlling electric underfloor heating and compatible 230 V thermal actuators used in water-based underfloor heating systems. A slim floor temperature sensor is included. It is also suitable for installations with heating film and thin electric heating mats.

DIN Rail Thermostat+1

The Terneo RK electric panel DIN rail thermostat is designed to control the operation of a heating cable, boiler, heater, pipelines or other heating systems. The electrical cabinet thermostat is DIN rail mounted and is able to regulate and maintain the temperature between -55 and +125°C. The temperature sensor is included. The electrical enclosure thermostat is special in that it can be used in systems with high load capacity – output relay 32A / 7kW .

DIN Rail Thermostat+1

Terneo bx  electric panel DIN rail thermostat with Wifi  is programmable and designed to regulate “floor heating” systems. The electrical cabinet temperature regulator Terneo BX Wifi has a powerful output relay (up to  32A / 7kW ). The remote controlled thermostat allows you to adjust the temperature from +5 to +40°C. The temperature sensor is included. DIN rail thermostat.

DIN Rail Thermostat+1

he DIN rail thermostat Terneo b 32A is specially designed to control underfloor heating systems. This temperature controller features an exceptionally powerful output relay — 32A / 7kW. The DIN rail thermostat allows you to regulate the temperature within a range of +5 to +40°C. The temperature is accurately measured and controlled using the included floor sensor. A major advantage of this thermostat is its compatibility with various NTC sensors, making it highly convenient if replacing an old thermostat's sensor in the floor is difficult

DIN Rail Thermostat+1

The thermostat ETI-1551 (-10 °C to +50 °C) is an On/Off switching thermostat designed for industrial applications, primarily for the control of a single electric heating element. The ETI-1551 thermostat is ideal for pipe frost protection and for the On/Off control of pumps and compressors. Furthermore, the device features an integrated changeover relay, which allows it to be used as a cooling thermostat .

DIN Rail Thermostat+2

The electronic gutter heating thermostat Elko TEV-1 is surface-mounted – ideal for preventing freezing or controlling gutter heating systems outdoors. It features IP65 moisture resistance and is suitable for outdoor temperatures down to –30 °C. The TEV-1 temperature controller offers versatile features. This roof heating thermostat is specially designed for controlling electrical heating cables installed in gutters, downpipes, roof valleys, and similar applications.

Gutter and Roof Heating Cable+1

Gutter Heating Thermostat Eberle DTR-E 3102 IP65 is a wall-mounted differential thermostat designed to control electric heating cables installed in gutters, downpipes and roof drainage areas. It operates the heating system only within a user-defined outdoor temperature range, helping to reduce unnecessary heating cable operation. The IP65-rated enclosure is suitable for outdoor wall mounting. An integrated bimetallic temperature sensor measures the ambient air temperature, so no separate outdoor temperature sensor is required.

Thermostats and Temperature Controllers+1

The 2.5m long sensor tube is designed for installing the floor sensor of the underfloor heating thermostat. The sensor tube allows you to replace the floor sensor later if necessary, if for some reason it should become necessary. When installing the sensor tube, it is important to ensure that the floor sensor is not accidentally left in a place on the floor in the future, which is under a cupboard or laundry box or something that would change the desired correct floor temperature reading.

DIN Rail Thermostat+2

Smart DIN Rail Thermostat for Electricity Spot Prices – Evesta Caladrius T1 is a single-phase smart DIN rail thermostat designed to control electric heating and electric water heaters according to temperature, schedules and electricity spot prices. The thermostat connects to a 2.4 GHz Wi-Fi network and is controlled through the Evesta mobile app. Price optimisation can shift suitable heating demand towards lower-priced 15- or 60-minute periods while keeping the temperature within limits selected by the user. Unlike a simple electricity price-controlled switch, the Caladrius T1 is a true thermostat. It measures temperature using an external NTC sensor and controls the connected heating system according to both temperature and electricity price settings.

DIN Rail Thermostat+1

The OJ ETI-1221 +10/+110°C thermostat is a 230 V DIN rail thermostat designed for simple ON/OFF control in heating, cooling, and industrial applications; the temperature sensor is not included.

Underfloor Heating and Room Thermostats+2

The Inkbird ITC-308-WIFI is a plug-in temperature controller equipped with an external temperature probe and two separately controlled output sockets: one for heating and one for cooling. The thermostat can maintain a selected temperature between –40 and +100 °C. Its WiFi connection allows you to monitor the measured temperature, change settings and receive alarm notifications remotely through the INKBIRD app.

DIN Rail Thermostat+1

The thermostat for control panels, DIN rail-mounted. Features a weekly programmable timer. Configurable via smartphone using NFC support. Complies with the Ecodesign directive.

Underfloor Heating and Room Thermostats+2

The Elko TEV-2 moisture-resistant outdoor thermostat is a universal, waterproof temperature controller designed for a wide range of heating and cooling applications. It monitors and regulates temperature in the range of –20 °C to +20 °C , making it suitable for both indoor and outdoor installations – such as greenhouses, laundries, or technical spaces exposed to moisture. The TEV-2 outdoor thermostat is easy to use and highly reliable. Its temperature range can be easily adjusted, and the device can control both heating and cooling systems. The moisture-resistant thermostat is housed in a durable IP65 enclosure, ensuring protection against dust and water jets. The display and control elements are located under the front cover, while the two-colour LED indicator clearly shows the operating status. The Elko TEV-2 thermostat also includes sensor short-circuit and open-circuit protection, ensuring long-term reliability and safety. The output relay can handle up to 1 × 16 A load.

DIN Rail Thermostat+1

OJ Electronics pinnaseandur ETOG-55 on spetsiaalselt välja töötatud välialade lume- ja jääsulatussüsteemide nutikaks ning energiasäästlikuks juhtimiseks. See paigaldatakse otse maapinda (sõiduteedele, kaldteedele, kõnniteedele või parklatesse) ning see on disainitud mõõtma samaaegselt nii maapinna temperatuuri kui ka niiskust.

Underfloor Heating and Room Thermostats+1

This slim NTC 10k underfloor heating sensor is primarily intended for replacing a faulty or damaged floor sensor. The sensor probe is only approximately 5 mm in diameter, making it easier to install in a narrow sensor conduit or in place of an existing sensor. The sensor has a 3-metre connection cable and a nominal resistance of 10 kΩ at +25 °C. It is compatible with Heatline HL-series thermostats and other underfloor heating thermostats designed to use the same type of NTC 10k sensor.

DIN Rail Thermostat+2

Intelligentne   OJ ETO2   “kõik ühes lahendus” jää ja lume sulatamise kilbi termostaat, sobib kasutamiseks nii hüdro- kui ka elektrikütte puhul. Jää ja lume sulatamine rennides ja välialadel. Kahe erineva iseseisva väljundiga.

DIN Rail Thermostat+1

The digital temperature controller OJ ETN4 (-19.5°C to +70°C) is designed for DIN rail mounting and features a clear, easy-to-read numerical display. This versatile underfloor heating thermostat is universal and suitable for controlling a wide variety of heating methods as well as cooling systems. More detailed information can be found in the product files attached below.

Underfloor Heating and Room Thermostats+1

This NTC 15 kΩ floor sensor, with its nominal resistance specified at +25 °C, is suitable for DEVIreg thermostats that use the same type of floor sensor. The sensor has a 3-metre cable and measures the floor temperature before transmitting the measurement to the thermostat. If a DEVI thermostat displays a sensor error, the cause may be a faulty or disconnected floor sensor. The slim sensor probe is suitable for replacing an existing sensor and for installation in a narrow sensor conduit or low-profile floor construction.

DIN Rail Thermostat+2

Three-phase wifi thermostat Caladrius T3 – smart temperature controller with Evesta mobile app The Caladrius T3 is a smart wifi thermostat that monitors electricity spot prices and helps reduce energy costs by using power exactly when it is the most economical. The Evesta mobile app automatically tracks Nord Pool electricity market prices and shifts heating loads to cheaper hours, ensuring significant savings without compromising comfort.

DIN Rail Thermostat+1

Termostaat OJ ETR2-1550 jää ja lume sulatamiseks vihmaveerennis või maapinnal niiskusanduriga / lumeanduriga. – Ühe väljundiga. Termostaadile on võimalik ühendada kuni 2 lumeandurit / renniandurit OJ ETR2 termostaat võimaldab väga energiasäästlikult juhtida jää ja lume sulatamist väiksemate paigalduste puhul. Eeliseks analoogide ees lihtne paigaldus, seadistus ja kasutusmugavus kasutajale. Andurid ei kuulu komplekti.

Underfloor Heating and Room Thermostats+1

Floor sensor 12kohm suitable as a replacement or accessory for OJ Electronics or Terneo thermostats