Gutter and Roof Heating Cable

Heating cables+1

Gutter and rainwater heating cable Heatcom 30W/m – designed for keeping downpipes, roof valleys, and roof edges free of ice and snow. Heatcom heating cables are manufactured in Denmark; they are high-quality, specially designed for outdoor use, and feature high tensile strength. The weatherproof gutter heating cable is equipped with a 2.5m power cable on one end. We offer a great selection of fasteners for the correct installation of heating cables on the roof. See the picture gallery below. Note: For smaller installations, we recommend a ready-made gutter cable with an integrated thermostat.

Heating cables+1

Roof heating cable 20W/m for SBS / PVC roofs The outdoor and roof heating cable with an output of 20W/m is designed for long-term outdoor use. This heating cable is perfectly suitable for use on bitumen, SBS, and PVC-coated roofs, where a lower heating cable output per linear meter is required compared to metal roofs. However, it is important to remember that keeping a 120mm gutter and downspout completely ice-free requires an output of 30-40W per meter. To achieve this capacity, the 20W/m heating cable must be installed back-and-forth (in a loop).

Heating cables+1

Vihmaveerenni küttekaabel integreeritud termostaadiga Heatcom Gutter Safe – valmiskomplekt on sobilik kasutamiseks vihmaveerenni ja katusele jäätumise ja jääpurikate tekkimise vältimiseks väiksemate paigaldiste puhul. Iga rennikaabel on varustatud bimetall termostaadiga parema energiasäästu saamiseks

Heating cables+3

The HTS eHeat Gutter self-regulating heating cable (20W/m) provides reliable ice and frost protection. It is a professional solution for protecting gutters, downspouts, and external sewage pipes from freezing. The system effectively prevents the formation of ice dams and damage to utilities even at temperatures dropping to -30 °C. The cable is supplied as a ready-to-use kit with a plug, making installation as simple and fast as possible. ✅ Efficiency: Automatically adjusts its power output depending on the ambient temperature. ✅ Versatility: Suitable for roofs, rainwater systems, and Ø110 mm sewer pipes. ✅ Economy: For maximum reduction in electricity costs, we highly recommend using the cable together with a thermostat.

Gutter and Roof Heating Cable+1

Gutter Heating Thermostat Eberle DTR-E 3102 IP65 is a wall-mounted differential thermostat designed to control electric heating cables installed in gutters, downpipes and roof drainage areas. It operates the heating system only within a user-defined outdoor temperature range, helping to reduce unnecessary heating cable operation. The IP65-rated enclosure is suitable for outdoor wall mounting. An integrated bimetallic temperature sensor measures the ambient air temperature, so no separate outdoor temperature sensor is required.

DIN Rail Thermostat+2

Gutter heating cable thermostat OJ ETR 1447a is designed for the precise control of roof and gutter heating cables. Compared to similar products, this electronic gutter and roof heating cable thermostat is incredibly easy to install, configure, and comfortable for the end-user to operate. Unlike cheaper bi-metal alternatives, the ETR1447 offers highly accurate temperature regulation.

DIN Rail Thermostat+2

Intelligentne   OJ ETO2   “kõik ühes lahendus” jää ja lume sulatamise kilbi termostaat, sobib kasutamiseks nii hüdro- kui ka elektrikütte puhul. Jää ja lume sulatamine rennides ja välialadel. Kahe erineva iseseisva väljundiga.

Gutter and Roof Heating Cable+1

Heating cable spacer clips for gutters and downspouts (25 pcs/pack) The heating cable spacer clip is designed for installations where maintaining a specific and consistent distance between heating cables is required. Installation calculation: 4 pcs per meter.

Gutter and Roof Heating Cable+1

Heating cable fixing chain in rainwater pipe, 1 m - hot-dip galvanized long link 4mm

Gutter and Roof Heating Cable+1

The heating cable chain clip is designed for the proper attachment of heating cables to a chain. Recommended installation density: 4 pcs per meter.

Gutter and Roof Heating Cable+1

The heating cable gutter clip is designed for the proper installation of a heating cable in a rainwater gutter, specifically when the cable needs to be laid back-and-forth (in a loop). If a 30W/m heating cable is installed in a gutter that is approximately 12 cm wide, a single run of the heating cable per linear meter of the gutter is sufficient, and spacer clips are not necessary. The heating cable can also be laid freely at the bottom of the gutter without using gutter clips. Installation calculation: 4 pcs per meter.

Gutter and Roof Heating Cable+1

Adhesive roof heating cable mount – 25pcs per pack

DIN Rail Thermostat+2

The gutter moisture and snow sensor ETOR-55 comes with a 10m cable. It is specially designed for the roof heating cable thermostat OJ ETR2 to ensure an automatic and energy-efficient ice melting system. The OJ ETOR-55 gutter moisture and snow sensor is designed for effectively melting ice and snow in gutters. This gutter sensor is perfectly compatible with the easy-to-use OJ ETR2 thermostat, as well as the advanced OJ ETO2 thermostat with adjustable parameters.

Gutter and Roof Heating Cable+1

The heating cable suspension cable is one of the good alternatives for fixing the heating cable to the gutter, especially if the heating cable needs to be installed further back in the gutter as needed. The suspension cable is equipped with mounting clips. Available in a 10m roll (in stock) and 20m (on order)

Gutter and Roof Heating Cable+2

Stainless steel hanging hook for self-regulating heating cable in gutters. A convenient way to install and secure the heating cable so that it stays in place and does not slide down the gutter.

Gutter and Roof Heating Cable+1

Stainless steel heating cable suspension bar for downspouts Length: 30 cm The heating cable suspension bar is designed for securing the heating cable's suspension wire, cord, chain, or mounting tape to the inlet of the downspout.

Gutter and Roof Heating Cable+1

Adhesive heating cable roof clip – aluminum (10 pcs/pack)

Gutter and Roof Heating Cable+2

The magnetic heating cable clip is quick and easy to install on all metal and tin surfaces. Equipped with a very strong magnet, this mounting clip is perfectly suited for securing heating cables to tin roofs, standing seam metal roofs, eaves, rainwater gutters, and other metallic surfaces. The magnetic heating cable clip can be attached using the magnet to either the front or back side of the gutter, and it can be easily detached from the roof or gutter bottom when necessary. Thanks to this compact clip, the gutter remains cleaner and less prone to accumulating leaves and other debris. It is an especially ideal solution for standing seam metal roofs where drilling holes is not an option. Package contains: 10 pieces.

Gutter and Roof Heating Cable+2

Heating cable strain relief - protection against sharp corners in the gutter. Made of stainless steel. Includes 4 fastening ties.

DIN Rail Thermostat+2

The electronic gutter heating thermostat Elko TEV-1 is surface-mounted – ideal for preventing freezing or controlling gutter heating systems outdoors. It features IP65 moisture resistance and is suitable for outdoor temperatures down to –30 °C. The TEV-1 temperature controller offers versatile features. This roof heating thermostat is specially designed for controlling electrical heating cables installed in gutters, downpipes, roof valleys, and similar applications.