Self-Regulating Heating Cable

Heating cables+2

Self-regulating heating cable from HTS eHeat Water – preassembled set 11W/m, designed for protecting water pipes from freezing, suitable for both internal and external installation. The self-regulating pipe heating cable comes with a 1.5m power cable. For internal pipe installation, a separate insertion nipple for the heating cable must be purchased. Certified for drinking water! The most energy-efficient result is always achieved when used together with a thermostat.  

Heating cables+3

The HTS eHeat Gutter self-regulating heating cable (20W/m) provides reliable ice and frost protection. It is a professional solution for protecting gutters, downspouts, and external sewage pipes from freezing. The system effectively prevents the formation of ice dams and damage to utilities even at temperatures dropping to -30 °C. The cable is supplied as a ready-to-use kit with a plug, making installation as simple and fast as possible. ✅ Efficiency: Automatically adjusts its power output depending on the ambient temperature. ✅ Versatility: Suitable for roofs, rainwater systems, and Ø110 mm sewer pipes. ✅ Economy: For maximum reduction in electricity costs, we highly recommend using the cable together with a thermostat.

Heating cables+2

HTS EHEAT® WATER is a self-regulating heating cable for protecting water pipes from freezing. Its food-safe outer jacket is approved for installation inside drinking water pipes. The cable can also be installed on the outside of a pipe beneath insulation. The cable can be cut to the required length, and its heat output adjusts to temperature. A thermostat is recommended to switch the heating off when frost protection is no longer needed. For installation inside a pipe, use a suitable cable entry gland and connection accessories.

Heating cables+2

HTS Global eHeat Gutter is a self-regulating heating cable designed to prevent ice formation on roofs, gutters, downpipes and drainage systems. Its UV-resistant and moisture-proof outer jacket makes it suitable for outdoor installations, including SBS bitumen roofs. The cable provides 20 W/m at +10 °C on an insulated metal pipe and approximately 40 W/m at 0 °C in ice water. It operates at 230 V, has a maximum operating temperature of +65 °C when energised and withstands temperatures up to +85 °C when unpowered. The cable can be cut to the required length on site. A suitable thermostat or automatic snow and ice controller should always be used to reduce energy consumption and prevent unnecessary heating.

Heating Cable for Water Pipe+2

The heating cable entry gland for water pipes with a 3/4-1″ thread is suitable for the Heatcom Aqua heating cable or self-regulating water pipe heating cables. The set includes 2 rubber seals, making this heating cable entry gland highly compatible with the Heatcom Aqua water pipe heating cable and most other self-regulating heating cables.

Heating Cable for Water Pipe+2

Self-regulating heating cable connection kit. Suitable for making connections for 10W, 11W, 15W, 20W, 25W self-regulating heating cables with regular electrical cable. Also includes instructions for making the end cap. Instructions in Estonian with illustrative pictures.

Heating Cable for Water Pipe+2

The heating cable pressure fitting 3/4" - 1" is designed for the secure and watertight installation of heating cables directly inside water pipes. This high-quality in-pipe heating cable gland ensures a completely hermetic seal, providing a safe solution for internal pipe freeze protection.

Gutter and Roof Heating Cable+2

Heating cable strain relief - protection against sharp corners in the gutter. Made of stainless steel. Includes 4 fastening ties.

Gutter and Roof Heating Cable+2

The magnetic heating cable clip is quick and easy to install on all metal and tin surfaces. Equipped with a very strong magnet, this mounting clip is perfectly suited for securing heating cables to tin roofs, standing seam metal roofs, eaves, rainwater gutters, and other metallic surfaces. The magnetic heating cable clip can be attached using the magnet to either the front or back side of the gutter, and it can be easily detached from the roof or gutter bottom when necessary. Thanks to this compact clip, the gutter remains cleaner and less prone to accumulating leaves and other debris. It is an especially ideal solution for standing seam metal roofs where drilling holes is not an option. Package contains: 10 pieces.

Gutter and Roof Heating Cable+2

Stainless steel hanging hook for self-regulating heating cable in gutters. A convenient way to install and secure the heating cable so that it stays in place and does not slide down the gutter.

Heating cables+2

Sigmian HTP is an ATEX-certified self-regulating industrial heating cable for freeze protection and temperature maintenance of pipelines, tanks and process equipment. The heating cable is suitable for both non-hazardous and hazardous Ex areas. The cable adjusts its power output according to the surrounding temperature, producing more heat in colder areas and less in warmer areas. Its parallel construction allows the cable to be cut to the required length on site. Always use the heating cable with a suitable thermostat.

Heating cables+2

Sigmian CTE is a high-output, ATEX-certified self-regulating industrial heating cable for heating outdoor areas, concrete, pipelines and vessels. It is primarily intended for applications where a standard-output self-regulating cable does not provide sufficient heating capacity. The Sigmian product page specifies an output of 80 W/m. The technical datasheet gives the 90-CTE model a nominal output of 90 W/m at 0 °C when installed in concrete. The maximum continuous operating temperature when energised is +80 °C, while the maximum continuous exposure temperature when de-energised is +100 °C. The heating cable operates at 230 V and is suitable for both non-hazardous and hazardous Ex areas.

Heating cables+2

Sigmian BTC is an ATEX-certified high-temperature self-regulating industrial heating cable designed for frost protection and temperature maintenance on pipelines, tanks and process equipment. Available power outputs at +10 °C are 8, 15, 24, 30, 37, 45 and 60 W/m. The cable operates at 230 V. Its maximum continuous operating temperature is +120 °C when energised, while the maximum exposure temperature when de-energised is +200 °C. BTC is suitable for both non-hazardous and hazardous Ex areas. Its parallel construction allows the cable to be cut to the required length on site. A suitable thermostat should always be used for accurate temperature control, lower energy consumption and longer cable life.

Heating cables+2

Sigmian BTX is an ATEX-certified high-temperature self-regulating industrial heating cable for frost protection and temperature maintenance on pipelines, tanks and process equipment. Available power outputs at +10 °C are 8, 15, 30, 45, 60, 75 and 100 W/m. The cable operates at 230 V. Its maximum continuous operating temperature is +205 °C when energised, while the maximum exposure temperature when de-energised is +250 °C. BTX is suitable for both non-hazardous and hazardous Ex areas. Its parallel construction allows the cable to be cut to the required length on site. A suitable thermostat must be used for accurate temperature control, lower energy consumption and longer cable life.

Heating cables+2

The portable water pipe frost protection wrap Heatcom Heating Wrap is a ready-to-use solution for preventing water and drain pipes from freezing on construction sites and in temporary installations. The wrap combines a self-regulating 15 W/m heating cable with built-in thermal insulation. The portable water pipe heater is wrapped around the pipe and secured with a hook-and-loop fastening. Once installed, it is connected to the power supply. The product is easy to remove, relocate and reuse.