Heating Cable Installation Accessories

Heating Cable for Water Pipe+2

The heating cable entry gland for water pipes with a 3/4-1″ thread is suitable for the Heatcom Aqua heating cable or self-regulating water pipe heating cables. The set includes 2 rubber seals, making this heating cable entry gland highly compatible with the Heatcom Aqua water pipe heating cable and most other self-regulating heating cables.

Heating Cable Installation Accessories

The galvanized steel heating cable fixing band is designed for securing various heating cables to different surfaces. Typically, this fixing band is used to fasten underfloor heating cables at the correct spacing and to hold the cable firmly in place during concrete pouring. The heating cable fixing band features lockable fastening tabs spaced at 25 mm intervals, allowing the heating cable to be locked into place very securely and accurately.

Heating Cable for Water Pipe+1

Installing a KIMA Connect  heating cable inside a water pipe requires a reliable feed-through—a compression fitting. This dedicated heating cable insertion nipple ensures a completely hermetic, watertight, and secure seal for your plumbing system. The process of inserting the heating cable into the pipe is carried out using a suitably sized T-junction (available at any standard plumbing supply store).

Gutter and Roof Heating Cable+1

Heating cable spacer clips for gutters and downspouts (25 pcs/pack) The heating cable spacer clip is designed for installations where maintaining a specific and consistent distance between heating cables is required. Installation calculation: 4 pcs per meter.

Gutter and Roof Heating Cable+1

Heating cable fixing chain in rainwater pipe, 1 m - hot-dip galvanized long link 4mm

Heating Cable for Water Pipe+1

Aluminium tape for securing a heating cable to the outside of a water pipe. The 50 mm wide tape keeps the cable against the pipe before thermal insulation is installed. Roll length: 25 m.

Gutter and Roof Heating Cable+1

The heating cable gutter clip is designed for the proper installation of a heating cable in a rainwater gutter, specifically when the cable needs to be laid back-and-forth (in a loop). If a 30W/m heating cable is installed in a gutter that is approximately 12 cm wide, a single run of the heating cable per linear meter of the gutter is sufficient, and spacer clips are not necessary. The heating cable can also be laid freely at the bottom of the gutter without using gutter clips. Installation calculation: 4 pcs per meter.

Gutter and Roof Heating Cable+1

The heating cable chain clip is designed for the proper attachment of heating cables to a chain. Recommended installation density: 4 pcs per meter.

Heating Cable for Water Pipe+2

Self-regulating heating cable connection kit. Suitable for making connections for 10W, 11W, 15W, 20W, 25W self-regulating heating cables with regular electrical cable. Also includes instructions for making the end cap. Instructions in Estonian with illustrative pictures.

Gutter and Roof Heating Cable+2

The magnetic heating cable clip is quick and easy to install on all metal and tin surfaces. Equipped with a very strong magnet, this mounting clip is perfectly suited for securing heating cables to tin roofs, standing seam metal roofs, eaves, rainwater gutters, and other metallic surfaces. The magnetic heating cable clip can be attached using the magnet to either the front or back side of the gutter, and it can be easily detached from the roof or gutter bottom when necessary. Thanks to this compact clip, the gutter remains cleaner and less prone to accumulating leaves and other debris. It is an especially ideal solution for standing seam metal roofs where drilling holes is not an option. Package contains: 10 pieces.

Gutter and Roof Heating Cable+2

Stainless steel hanging hook for self-regulating heating cable in gutters. A convenient way to install and secure the heating cable so that it stays in place and does not slide down the gutter.

Gutter and Roof Heating Cable+1

Stainless steel heating cable suspension bar for downspouts Length: 30 cm The heating cable suspension bar is designed for securing the heating cable's suspension wire, cord, chain, or mounting tape to the inlet of the downspout.

Gutter and Roof Heating Cable+1

Adhesive roof heating cable mount – 25pcs per pack

Heating Cable Installation Accessories

Küttekaabli kinnitus valtsile. Sobilik vihmaveerenni küttekaablile läbimõõdus 8-9mm ja 20W/m isereguleeruvale küttekaablile. 10tk pakis

Gutter and Roof Heating Cable+1

The heating cable suspension cable is one of the good alternatives for fixing the heating cable to the gutter, especially if the heating cable needs to be installed further back in the gutter as needed. The suspension cable is equipped with mounting clips. Available in a 10m roll (in stock) and 20m (on order)

Gutter and Roof Heating Cable+2

Heating cable strain relief - protection against sharp corners in the gutter. Made of stainless steel. Includes 4 fastening ties.

Heating Cable for Water Pipe+2

The heating cable pressure fitting 3/4" - 1" is designed for the secure and watertight installation of heating cables directly inside water pipes. This high-quality in-pipe heating cable gland ensures a completely hermetic seal, providing a safe solution for internal pipe freeze protection.

Gutter and Roof Heating Cable+1

Adhesive heating cable roof clip – aluminum (10 pcs/pack)

Heating Cable for Water Pipe+1

Hoiatuskleebis, mis on mõeldud paigaldamiseks näiteks veetorustikele või muudele paigaldistele teavitamaks küttekaabli olemasolust antud asukohas. 10tk komplektis. Mõõdud 10cm x 3,5cm

Industrial heating cables+1

The TKR is a connection and end termination kit for connecting a self-regulating heating cable directly to the terminals of a junction box and hermetically sealing the free end of the cable. It is suitable for SST / Sigmian HTM, HTA, HTP, BTC, BTCe, BTX and BTXe series heating cables and junction boxes with an M25 cable entry.

Thermostats and Temperature Controllers+1

The 2.5m long sensor tube is designed for installing the floor sensor of the underfloor heating thermostat. The sensor tube allows you to replace the floor sensor later if necessary, if for some reason it should become necessary. When installing the sensor tube, it is important to ensure that the floor sensor is not accidentally left in a place on the floor in the future, which is under a cupboard or laundry box or something that would change the desired correct floor temperature reading.