Drum Heating
12 products
Drum and tank heating is used for frost protection, heating liquids, melting and maintaining the required viscosity of products. The Heatline range includes drum heater, heating jacket, bottom heater, immersion heater and ATEX/EX solutions for hazardous areas. The equipment is suitable for oil, honey, syrup, wax, resin, chemicals and other viscous materials. Even heating helps reduce product loss and makes unloading from the tank or drum easier.
Showing 1-12 / 12
Drum Heating
Teisaldatav tünni küttekeha
Teisaldatav veetünni / vaadi elektriline veesoojendi / küttekeha termostaadiga 1500W 230V. Eriti hea abiline, kui teemaks on tünni soojendamine talvel, et vesi ei külmuks
Includes 24% VAT
Drum Heating
Base Drum Heater 0–120 °C for 200 L Metal Drums
The base drum heater is designed to heat metal drums from below. The electric heating platform helps maintain the required temperature, reduce the viscosity of liquids and soften materials that thicken or solidify when cooled. The heater is suitable for standard metal drums with a capacity of up to 200 litres. Its built-in thermostat allows the operating temperature of the heating platform to be adjusted between 0 and 120 °C. The base drum heater can be used for water, oils, diesel fuel, resins, petroleum jelly, waxes, fats, greases, glues, adhesives and various other industrial materials. The selected temperature must always be suitable for the drum and the material being heated.
Includes 24% VAT
Drum Heating
High-Temperature Base Drum Heater 50–300 °C
The high-temperature base drum heater is designed to heat metal drums from below. The electric heating platform helps maintain the required temperature, reduce the viscosity of liquids and soften materials that thicken or solidify when cooled. The base drum heater is suitable for standard metal drums with a capacity of up to 200 litres. Its built-in thermostat allows the operating temperature of the heating platform to be adjusted between 50 and 300 °C. The heater can be used for oils, diesel fuel, resins, petroleum jelly, waxes, fats, greases, glues, adhesives and other industrial materials. The selected temperature must always be suitable for the material being heated.
Includes 24% VAT
Drum Heating
Drum Heater 0–90 °C
The electric drum heater is designed to heat substances stored in drums, maintain a consistent temperature and reduce viscosity. The flexible heating jacket helps prevent the contents from freezing or thickening, making viscous materials easier to pump, mix and dispense. The drum heater is suitable for heating water, oil, diesel fuel, resin, petroleum jelly, wax, fats, syrups, adhesives and other industrial materials. Models are available for standard 25/30, 50/60, 105 and 200 litre drums.
Includes 24% VAT
Drum Heating
Barrel keg heater for the food and pharmaceutical industries
Barrel / keg heating, heater, warming, thawing – for the food and pharmaceutical industries 0-120°C in accordance with the required rules. Heating, keeping warm, preventing freezing, defrosting or heating liquids in the barrel. The barrel heater's covering material is made with increased safety and hygiene requirements in mind. The material used does not promote the development of bacteria. The barrel heater is equipped with two precise electronic digital display thermostats. The barrel heater is suitable for use in both material storage and transportation. 12-1208 / 200L / 1990-800mm / 230V / 1200W 15-1921F Insulated lid Ø600mm H100mm
Quote provided on request
Drum Heating
Drum Heater 0–200 °C for Metal Drums
This high-temperature drum heater is designed to heat substances stored in metal drums, maintain their temperature and reduce viscosity. The electric heating jacket helps prevent the contents from freezing or solidifying and makes viscous materials easier to pump, mix and remove from the drum. The drum heater is suitable for heating water, oils, diesel fuel, resins, waxes, petroleum jelly, lubricants and other industrial liquids. Models are available for standard 25/30, 50/60, 105 and 200 litre metal drums.
Includes 24% VAT
Drum Heating
Silicone drum heater Eco for metal barrels
The silicone drum heater Eco is designed for winter frost protection, maintaining a consistent temperature, or actively heating liquids stored in metal drums. It is an excellent solution for keeping substances like wax, petroleum jelly, honey, fat, oil, and syrup in a fluid state. Without additional heating, these materials tend to solidify or become too viscous, making this drum heater an essential tool for melting and warming the contents efficiently.
Includes 24% VAT
Drum Heating
Tünni / vaadi soojendi 0 kuni +120°C
Tünni soojendi kuumakindlast silikoonist 0 – 120°C on mõeldud metall tünnis olevate vedelike talviseks jäätumise kaitseks, soojana hoidmiseks, sisu soojendamine, kütmine. Suurepärane võimalus hoida tünnides näiteks vaha, vaseliini, mee, rasva, õli, siirupeid nõutud temperatuuril, mis muidu kipuksid hanguma. Tünni küttekeha on sobilik vaadi sisu soojendamiseks hoiustamisel, kui ka transportimisel. Taani toode
Includes 24% VAT
Drum Heating
Insulated Drum Jacket for 200 L Drums
The insulated drum jacket is designed to insulate a standard 200 litre drum, reduce heat loss and help maintain a more stable temperature inside the drum. It can be used as standalone passive insulation or together with a drum base heater. When used with a base heater, the insulation jacket reduces heat loss and helps the contents reach the required temperature more quickly. It can improve the energy efficiency of the heating system and slow down cooling after the heater has been switched off.
Includes 24% VAT
Drum Heating
Gas Cylinder Heater with Digital Thermostat
The gas cylinder heater is an electric heating jacket fitted around a cylinder to help prevent cooling and frosting during gas withdrawal. Maintaining a more stable cylinder temperature supports consistent gas pressure and flow in laboratory and industrial processes. The gas cylinder heating jacket is equipped with a digital thermostat, a safety thermostat and adjustable quick-release buckles. The temperature can be regulated from 0 to 40 °C.
Includes 24% VAT
Drum Heating
Gaasiballooni ATEX keskkonna soojendi
Gaasiballooni plahvatusohtliku EX keskkonna soojendus / soojendi / kütteseade. ATEX gaasiballooni soojendi / kütteümbriste seeria on ohutu, tõhus ja kohandatav kütelahendus plahvatusohtlikes tsoonides paiknevatele gaasiballoonidele. Gaasiballooni soojendusega kütteümbris leiab kasutust külmakaitseks, temperatuuri hoidmiseks ning protsessikütmiseks paljudes tööstusharudes. ATEX Gas Bottle Heater seeria on töökindel ja ohutu lahendus gaasiballoonide soojendamiseks temperatuurivahemikus –40 °C kuni +50 / +60 °C , tagades usaldusväärse töö ka rasketes keskkonnatingimustes.
Quote provided on request
Drum Heating
ATEX Drum Heater for Hazardous Areas
The ATEX drum heater is designed for the safe heating of liquids, pastes and solid materials stored in steel or plastic drums in potentially explosive industrial environments. The flexible heating jacket helps maintain the required process temperature, reduce product viscosity and prevent the contents from freezing or solidifying. The drum heater is suitable for the oil and gas, chemical, pharmaceutical and other industries where potentially explosive gases or combustible dust may be present. Standard models are available for drums from 25 to 200 litres. Custom sizes and configurations are also available on request.
Quote provided on request