DS Electronics

Voltage Monitoring Relays and Electrical Equipment Protection

ZUBR Dt is a single-phase voltage monitoring relay with thermal protection. It protects domestic and industrial electrical equipment against dangerous overvoltage, undervoltage and voltage deviations caused by neutral conductor failure. The voltage relay is installed inside an electrical distribution board and disconnects the load when the voltage exceeds the user-defined limits. Heatline offers 25 A and 40 A models. ZUBR Dt is intended primarily for a standard 230 V mains supply with a sinusoidal voltage waveform. It is suitable for protecting household appliances, heating equipment, pumps, compressors, refrigerators and other voltage-sensitive equipment. Detailed settings and wiring diagrams are available in the manufacturer’s English ZUBR Dt web manual . ZUBR Dt is a voltage monitoring relay, not an impulse surge protective device. It does not replace a Type 1 or Type 2 SPD but can be used alongside one as part of a coordinated protection system.

DIN Rail Thermostat, Thermostats and Temperature Controllers

The Terneo RK electric panel DIN rail thermostat is designed to control the operation of a heating cable, boiler, heater, pipelines or other heating systems. The electrical cabinet thermostat is DIN rail mounted and is able to regulate and maintain the temperature between -55 and +125°C. The temperature sensor is included. The electrical enclosure thermostat is special in that it can be used in systems with high load capacity – output relay 32A / 7kW .

DIN Rail Thermostat, Thermostats and Temperature Controllers

Terneo bx  electric panel DIN rail thermostat with Wifi  is programmable and designed to regulate “floor heating” systems. The electrical cabinet temperature regulator Terneo BX Wifi has a powerful output relay (up to  32A / 7kW ). The remote controlled thermostat allows you to adjust the temperature from +5 to +40°C. The temperature sensor is included. DIN rail thermostat.

DIN Rail Thermostat, Thermostats and Temperature Controllers

he DIN rail thermostat Terneo b 32A is specially designed to control underfloor heating systems. This temperature controller features an exceptionally powerful output relay — 32A / 7kW. The DIN rail thermostat allows you to regulate the temperature within a range of +5 to +40°C. The temperature is accurately measured and controlled using the included floor sensor. A major advantage of this thermostat is its compatibility with various NTC sensors, making it highly convenient if replacing an old thermostat's sensor in the floor is difficult

DIN Rail Thermostat, Thermostats and Temperature Controllers

Electric panel double thermostat with two outputs and two sensors Terneo k2. Temperature adjustment range -9 +99°С. Suitable for both heating and cooling . DIN rail mounting. Double thermostat – two thermostats in one housing. An electric panel DIN rail thermostat can control two different heating or cooling systems. If you place both temperature sensors in the same place, one of them can be connected to the heating system and the other to the cooling system. Output relays 2 x 16A

DIN Rail Thermostat, Thermostats and Temperature Controllers

The Terneo SN differential DIN-rail thermostat for gutter and roof heating cables is designed specifically for melting ice and snow on roofs. It efficiently keeps the heating cable operating within a specific range, for example, from +2°C to -3°C. This temperature range is fully adjustable according to the customer's specific needs and situation. The overall adjustment range is -30…+90°C.

Underfloor Heating and Room Thermostats, Thermostats and Temperature Controllers

Wifi põrandakütte termostaat Terneo SX on loodud põrandakütte juhtimiseks nutiseadet kasutades või Google Home’i häälega juhtimise kaudu ükskõik kus maalilma punktis te parasjagu viibite. Temperatuuri jälgimiseks ja seadistamiseks on mugav kasutada ka arvutirakendust my.terneo.ua. Saate kohe juurdepääsu oma kodutemperatuuri, kütte dünaamika ja energiaaruannetele kWh-s ja rahas. – Nutikas põrandakütte termostaat töötab paljude erinevate tootjate põrandaanduritega. Eriti kasulik funktsioon, kui käsil on vana põrandakütte termostaadi vahetus uue ja säästlikuma vastu, aga vana põrandaandurit ei saa põrandast kätte.

Voltage Monitoring Relays and Electrical Equipment Protection

ZUBR D2 is a single-phase voltage monitoring relay designed for installation in an electrical distribution board. It protects electrical equipment in homes, offices and other buildings against overvoltage, undervoltage and dangerous voltage deviations caused by neutral conductor failure. When the mains voltage exceeds the selected limits, the relay disconnects the load and restores power after the voltage has returned to normal. The relay is available as the ZUBR D2-40A and ZUBR D2-63A . It is suitable for protecting household appliances, heating equipment, refrigerators, air conditioners, computers and other devices sensitive to voltage fluctuations. ZUBR D2 does not replace a Type 1 or Type 2 surge protection device (SPD). It complements distribution board protection by disconnecting the load during dangerous mains voltage deviations.

Voltage Monitoring Relays and Electrical Equipment Protection

ZUBR D6 is a three-phase voltage monitoring relay for installation in an electrical distribution board. It protects domestic and industrial electrical equipment, including three-phase motors, against overvoltage, undervoltage, phase imbalance, phase loss, incorrect phase sequence and the consequences of neutral conductor failure. The relay can protect either three independent single-phase loads or one three-phase load. Detailed settings and wiring diagrams are available in the manufacturer’s English ZUBR D6 web manual . ZUBR D6 is a voltage monitoring relay, not an impulse surge protective device. It does not replace a Type 1 or Type 2 SPD but can be used alongside one as part of a coordinated electrical protection system.

Voltage Monitoring Relays and Electrical Equipment Protection

Multifunctional relay ZUBR MF2-40 red offers maximum protection for your home appliances and technology. This smart device combines three important functions: current relay, voltage relay and power limiter. The relay provides full control over three main parameters – voltage, current and power – and is an indispensable solution in any modern electrical panel.

Voltage Monitoring Relays and Electrical Equipment Protection

The DS Electronics ZUBR 3F three-phase voltage relay is designed to protect household and industrial equipment, including three-phase electric motors, from excessive and undervoltage. The device monitors the phase sequence and switches off the load if phase asymmetry occurs. The load shutdown delay time can be set as needed.

Voltage Monitoring Relays and Electrical Equipment Protection

Voltage relay with current control   DS Electronics   ZUBR CV2   protects devices from too high and too low voltage, neutral wire interruption, as well as excessive current or power consumption. In case of voltage deviations, the voltage relay switches off the load, and when the voltage returns to normal, it automatically switches the load back on. If the current or power exceeds the allowed value, the load is switched off after the set delay time.